XC6108C48BGR-G

Product Overview

Category

XC6108C48BGR-G belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage detector in various electronic devices.

Characteristics

• Voltage detection range: 0.9V to 6.0V
• Low current consumption: typically 1.0μA
• High accuracy: ±2%
• Built-in delay circuit
• Small package size: SOT-23-5

Package and Quantity

XC6108C48BGR-G is packaged in a SOT-23-5 package. It is available in reels with a quantity of 3000 units per reel.

Specifications

• Supply voltage range: 0.9V to 6.0V
• Operating temperature range: -40°C to +85°C
• Output type: N-channel open drain
• Output voltage: VOUT = VSS or open drain
• Detection voltage options: 2.0V, 2.3V, 2.5V, 2.7V, 3.0V, 3.1V, 3.3V, 4.0V, 4.3V, 4.5V, 4.7V, 5.0V

Detailed Pin Configuration

The XC6108C48BGR-G has five pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin 1: VDD - Supply voltage input
Pin 2: GND - Ground
Pin 3: VOUT - Output voltage
Pin 4: CE - Chip enable
Pin 5: NRST - Reset output

Functional Features

1. Voltage Detection: The XC6108C48BGR-G can accurately detect the input voltage within the specified range.
2. Low Power Consumption: It consumes very low current, making it suitable for battery-powered devices.
3. Built-in Delay Circuit: The integrated delay circuit prevents false detections caused by voltage fluctuations or noise.
4. Open Drain Output: The N-channel open drain output allows flexibility in connecting to other devices.

Advantages and Disadvantages

Advantages

• Wide voltage detection range
• High accuracy
• Low power consumption
• Small package size
• Built-in delay circuit for reliable detection

Disadvantages

• Limited number of available detection voltage options
• Requires external components for proper operation

Working Principles

The XC6108C48BGR-G operates based on a voltage comparison principle. When the input voltage exceeds the set detection voltage, the output pin is pulled low. Conversely, when the input voltage falls below the detection voltage, the output pin remains high impedance.

Detailed Application Field Plans

The XC6108C48BGR-G can be used in various applications, including but not limited to:

1. Battery-powered devices: It can be used to monitor battery voltage and trigger actions when the voltage reaches a certain level.
2. Power management systems: It can be utilized as a voltage supervisor to ensure stable operation of power supply circuits.
3. Consumer electronics: It can be employed in devices that require voltage monitoring, such as smartphones, tablets, and portable gaming consoles.

Detailed and Complete Alternative Models

1. XC6108C48BGR-G-RR: Same specifications as XC6108C48BGR-G, but available in a tape and reel package with 2500 units per reel.
2. XC6108C48BGR-G-T: Same specifications as XC6108C48BGR-G, but available in a tube package with 100 units per tube.
3. XC6108C48BGR-G-TR: Same specifications as XC6108C48BGR-G, but available in a tape and reel package with 1000 units per reel.

These alternative models provide options for different packaging quantities to suit various production requirements.

In conclusion, the XC6108C48BGR-G is an integrated circuit voltage detector with a wide detection range, low power consumption, and high accuracy. It finds applications in battery-powered devices, power management systems, and consumer electronics. While it has limited detection voltage options, it offers reliable voltage monitoring with built-in delay circuitry. Alternative models are available with different packaging quantities to accommodate diverse production needs.