Деталі продукту див. у специфікаціях.
XC6118C24BGR-G
Product Overview
Category
XC6118C24BGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6118C24BGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: It consumes minimal power when in standby mode.
- Overcurrent protection: It safeguards the circuit by limiting the current flow.
- Thermal shutdown protection: It prevents damage due to excessive heat.
Package
XC6118C24BGR-G is available in a small surface-mount package.
Essence
The essence of XC6118C24BGR-G lies in its ability to provide reliable and stable voltage regulation for electronic circuits.
Packaging/Quantity
It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 2.4V
- Maximum output current: 150mA
- Dropout voltage: 200mV (at 100mA)
- Quiescent current: 30μA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6118C24BGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6118C24BGR-G maintains a constant output voltage regardless of variations in the input voltage.
- Overcurrent protection: It limits the current flow to protect the circuit from damage.
- Thermal shutdown protection: It shuts down the device when the temperature exceeds a certain threshold, preventing overheating.
Advantages and Disadvantages
Advantages
- Stable output voltage ensures reliable performance of electronic components.
- Low dropout voltage allows efficient operation even with small voltage differentials.
- Low quiescent current minimizes power consumption in standby mode.
- Overcurrent protection safeguards the circuit from damage.
- Thermal shutdown protection prevents overheating.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Narrow input voltage range restricts compatibility with certain systems.
Working Principles
XC6118C24BGR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. By continuously monitoring the output voltage, it compensates for any fluctuations in the input voltage, ensuring a stable supply to connected components.
Detailed Application Field Plans
XC6118C24BGR-G finds application in various electronic devices and circuits, including: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6118C24BGR-G are: - LM1117-2.4 - MCP1700-2.4 - LP2985-2.4 - TPS78225
These alternatives can be considered based on specific requirements and availability.
Word count: 440 words
Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6118C24BGR-G у технічних рішеннях
Sure! Here are 10 common questions and answers related to the application of XC6118C24BGR-G in technical solutions:
Q: What is XC6118C24BGR-G? A: XC6118C24BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C24BGR-G? A: The operating voltage range of XC6118C24BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C24BGR-G help in technical solutions? A: XC6118C24BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: What is the typical reset voltage threshold of XC6118C24BGR-G? A: The typical reset voltage threshold of XC6118C24BGR-G is 2.4V.
Q: Can XC6118C24BGR-G be used in battery-powered applications? A: Yes, XC6118C24BGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Does XC6118C24BGR-G have any built-in delay for the reset signal? A: Yes, XC6118C24BGR-G has a built-in delay of approximately 200ms to ensure stable operation during power-up or power-down transitions.
Q: Is XC6118C24BGR-G available in different package options? A: Yes, XC6118C24BGR-G is available in a SOT-25 package, which is a small surface-mount package.
Q: Can XC6118C24BGR-G be used in automotive applications? A: Yes, XC6118C24BGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: What is the maximum supply current of XC6118C24BGR-G? A: The maximum supply current of XC6118C24BGR-G is typically 1.0µA, making it highly efficient in power-sensitive designs.
Q: Are there any application notes or reference designs available for XC6118C24BGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing XC6118C24BGR-G in various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of XC6118C24BGR-G.