Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6118C35BGR-G
Переглянути деталі Таблиці даних

XC6118C35BGR-G

Product Overview

Category

XC6118C35BGR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: BGA (Ball Grid Array)
  • Essence: Voltage regulator IC (Integrated Circuit)
  • Packaging/Quantity: Typically sold in reels or tubes containing a specific quantity of units.

Specifications

The specifications of XC6118C35BGR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.5V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of XC6118C35BGR-G is as follows:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. VOUT (Output Voltage)

Functional Features

XC6118C35BGR-G offers the following functional features:

  • Low dropout voltage, ensuring efficient voltage regulation.
  • Low quiescent current, minimizing power consumption.
  • Enable pin for easy control of the regulator's operation.
  • Stable output voltage even under varying load conditions.
  • Overcurrent and thermal protection for enhanced reliability.

Advantages and Disadvantages

Advantages: - Compact BGA package allows for space-saving integration into small electronic devices. - Wide input voltage range provides flexibility in various applications. - Low dropout voltage ensures efficient power conversion. - Excellent load and line regulation characteristics.

Disadvantages: - Limited output current capacity may not be suitable for high-power applications. - BGA package may require specialized equipment for soldering and rework.

Working Principles

XC6118C35BGR-G operates based on the principle of voltage regulation. It takes an input voltage within the specified range and provides a stable output voltage of 3.5V, regardless of load variations. The enable pin allows for easy control of the regulator's operation, enabling power-saving modes when necessary.

Detailed Application Field Plans

XC6118C35BGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C35BGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements and design considerations.

Word count: 320 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6118C35BGR-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6118C35BGR-G in technical solutions:

  1. Q: What is XC6118C35BGR-G? A: XC6118C35BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C35BGR-G? A: The operating voltage range of XC6118C35BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C35BGR-G help in technical solutions? A: XC6118C35BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset threshold voltage of XC6118C35BGR-G? A: The typical reset threshold voltage of XC6118C35BGR-G is 3.5V.

  5. Q: Can XC6118C35BGR-G be used in battery-powered applications? A: Yes, XC6118C35BGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Q: Does XC6118C35BGR-G have any built-in delay for the reset signal? A: Yes, XC6118C35BGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Is XC6118C35BGR-G suitable for automotive applications? A: Yes, XC6118C35BGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.

  8. Q: Can XC6118C35BGR-G be used in industrial control systems? A: Yes, XC6118C35BGR-G can be used in industrial control systems to ensure proper operation and protection against voltage fluctuations.

  9. Q: Does XC6118C35BGR-G have any additional features or protections? A: Yes, XC6118C35BGR-G has built-in overcurrent protection and a hysteresis function to prevent false triggering of the reset signal.

  10. Q: What is the package type of XC6118C35BGR-G? A: XC6118C35BGR-G is available in a small SOT-25 package, which makes it suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.