Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6118C37BGR-G
Переглянути деталі Таблиці даних

XC6118C37BGR-G

Product Overview

Category

XC6118C37BGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6118C37BGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: It prevents damage due to excessive heat.

Package

XC6118C37BGR-G is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of XC6118C37BGR-G lies in its ability to provide reliable voltage regulation while consuming minimal power.

Packaging/Quantity

XC6118C37BGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.3V
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 25µA (typical)
  • Maximum output current: 100mA
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6118C37BGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6118C37BGR-G maintains a constant output voltage regardless of variations in the input voltage.
  • Overcurrent protection: It limits the output current to prevent damage to the circuit.
  • Thermal shutdown protection: It shuts down the device if the temperature exceeds a safe threshold.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable operation of connected components.
  • Low dropout voltage allows efficient operation even with small input-output voltage differentials.
  • Low quiescent current minimizes power consumption in standby mode.
  • Overcurrent protection safeguards the circuit from excessive current flow.
  • Thermal shutdown protection prevents damage due to overheating.

Disadvantages

  • Limited maximum output current (100mA) may not be suitable for high-power applications.
  • Restricted input voltage range (2.5V - 6.0V) may limit compatibility with certain systems.

Working Principles

XC6118C37BGR-G utilizes internal circuitry to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the internal feedback loop to maintain a constant output voltage. The overcurrent protection feature monitors the output current, while the thermal shutdown protection activates when the temperature exceeds a predetermined threshold.

Detailed Application Field Plans

XC6118C37BGR-G finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C37BGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Note: The content provided above is approximately 400 words. Please expand or modify the information as needed to meet the required word count of 1100 words.

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6118C37BGR-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6118C37BGR-G in technical solutions:

  1. Q: What is XC6118C37BGR-G? A: XC6118C37BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C37BGR-G? A: The operating voltage range of XC6118C37BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C37BGR-G help in technical solutions? A: XC6118C37BGR-G helps in technical solutions by ensuring proper power supply voltage levels, preventing malfunction or damage to electronic devices.

  4. Q: Can XC6118C37BGR-G be used in battery-powered applications? A: Yes, XC6118C37BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the typical reset threshold voltage of XC6118C37BGR-G? A: The typical reset threshold voltage of XC6118C37BGR-G is 3.7V.

  6. Q: Does XC6118C37BGR-G have an adjustable reset threshold voltage? A: No, XC6118C37BGR-G has a fixed reset threshold voltage and does not offer adjustment options.

  7. Q: Is XC6118C37BGR-G suitable for automotive applications? A: Yes, XC6118C37BGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  8. Q: What is the output type of XC6118C37BGR-G? A: XC6118C37BGR-G has an open-drain output type, which requires an external pull-up resistor.

  9. Q: Can XC6118C37BGR-G be used in high-temperature environments? A: Yes, XC6118C37BGR-G can operate in a wide temperature range from -40°C to +125°C, making it suitable for high-temperature environments.

  10. Q: Is XC6118C37BGR-G available in different package options? A: Yes, XC6118C37BGR-G is available in various package options, including SOT-25 and USP-4B, providing flexibility in design and integration.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C37BGR-G.