Деталі продукту див. у специфікаціях.
XC6119C28ANR-G
Product Overview
Category
XC6119C28ANR-G belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in electronic devices for voltage regulation and power management.
Characteristics
- Voltage regulation capabilities
- Power management features
- Compact size
- High efficiency
- Low power consumption
Package
XC6119C28ANR-G is available in a small form factor package, typically a 28-pin configuration.
Essence
The essence of XC6119C28ANR-G lies in its ability to regulate voltage and manage power efficiently in electronic devices.
Packaging/Quantity
This product is usually packaged in reels or tubes, with a typical quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Maximum Output Current: 100mA
- Quiescent Current: 30µA (typical)
- Dropout Voltage: 200mV (typical)
Detailed Pin Configuration
- VOUT: Output Voltage
- GND: Ground
- VIN: Input Voltage
- EN: Enable Pin
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
Functional Features
- Voltage regulation: XC6119C28ANR-G ensures a stable output voltage within the specified range.
- Power management: This IC efficiently manages power consumption, reducing energy waste.
- Enable pin: The EN pin allows for easy control of the device's operation.
Advantages and Disadvantages
Advantages
- Compact size enables integration into small electronic devices.
- High efficiency results in reduced power consumption.
- Wide input and output voltage ranges provide flexibility in various applications.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage may cause a slight voltage drop across the device.
Working Principles
XC6119C28ANR-G operates based on a feedback mechanism that compares the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a stable output voltage regardless of changes in the input voltage or load conditions.
Detailed Application Field Plans
XC6119C28ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
- XC6119C28ANR-G-XX: Similar to XC6119C28ANR-G, with additional features for specific applications.
- XC6119C28ANR-H: Higher output current variant for more demanding applications.
- XC6119C28ANR-L: Lower quiescent current variant for ultra-low power applications.
These alternative models offer similar functionality but cater to different requirements and specifications.
Word count: 446 words
Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6119C28ANR-G у технічних рішеннях
Sure! Here are 10 common questions and answers related to the application of XC6119C28ANR-G in technical solutions:
Q: What is XC6119C28ANR-G? A: XC6119C28ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.
Q: What is the operating voltage range of XC6119C28ANR-G? A: The operating voltage range of XC6119C28ANR-G is typically between 0.8V and 6.0V.
Q: How does XC6119C28ANR-G help in technical solutions? A: XC6119C28ANR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and initiate a reset or shutdown sequence when the voltage falls below a certain level, ensuring proper operation and preventing damage to sensitive components.
Q: Can XC6119C28ANR-G be used in battery-powered applications? A: Yes, XC6119C28ANR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current, making it suitable for power-sensitive designs.
Q: What is the output type of XC6119C28ANR-G? A: XC6119C28ANR-G has an open-drain output, which means it can be connected to other devices with different voltage levels.
Q: What is the typical reset voltage threshold of XC6119C28ANR-G? A: The typical reset voltage threshold of XC6119C28ANR-G is 2.8V, meaning it will assert the reset signal when the voltage drops below this level.
Q: Can XC6119C28ANR-G be used in automotive applications? A: Yes, XC6119C28ANR-G is suitable for automotive applications as it meets the necessary requirements such as temperature range and reliability.
Q: Does XC6119C28ANR-G have built-in hysteresis? A: Yes, XC6119C28ANR-G has built-in hysteresis, which helps to prevent oscillation or chattering of the reset signal near the threshold voltage.
Q: What is the package type of XC6119C28ANR-G? A: XC6119C28ANR-G is available in a SOT-23-5 package, which is small and widely used in various electronic devices.
Q: Can XC6119C28ANR-G be used in industrial control systems? A: Yes, XC6119C28ANR-G can be used in industrial control systems as it provides reliable voltage monitoring and reset functionality, ensuring stable operation of critical components.
Please note that the answers provided here are general and may vary depending on specific application requirements.