Деталі продукту див. у специфікаціях.
XC6121C442MR-G
Product Overview
Category
XC6121C442MR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- Low power consumption
- High accuracy
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6121C442MR-G comes in a small surface-mount package.
Essence
The essence of XC6121C442MR-G lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
It is typically packaged in reels and the quantity per reel varies depending on the manufacturer.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.42V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 20µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6121C442MR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation
- Overcurrent protection
- Thermal shutdown protection
- Low quiescent current
- Fast transient response
Advantages
- Small form factor
- Wide input voltage range
- High accuracy
- Low power consumption
- Built-in protection features
Disadvantages
- Limited output current capacity
- Not suitable for high-power applications
Working Principles
XC6121C442MR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite changes in the input voltage or load conditions.
Detailed Application Field Plans
XC6121C442MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Medical devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6121C442MR-G are: - XC6121C442ML-G - XC6121C442MP-G - XC6121C442MS-G - XC6121C442MT-G
These models have similar specifications and functionality, providing flexibility in design choices.
Word count: 275 words
Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6121C442MR-G у технічних рішеннях
Sure! Here are 10 common questions and answers related to the application of XC6121C442MR-G in technical solutions:
Q1: What is XC6121C442MR-G? A1: XC6121C442MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q2: What is the operating voltage range of XC6121C442MR-G? A2: The operating voltage range of XC6121C442MR-G is from 0.8V to 6.0V.
Q3: What is the output type of XC6121C442MR-G? A3: XC6121C442MR-G has an open-drain output type.
Q4: What is the typical quiescent current of XC6121C442MR-G? A4: The typical quiescent current of XC6121C442MR-G is 1.0µA.
Q5: What is the accuracy of the detection voltage of XC6121C442MR-G? A5: The accuracy of the detection voltage of XC6121C442MR-G is ±2%.
Q6: Can XC6121C442MR-G be used for overvoltage detection? A6: No, XC6121C442MR-G is designed for undervoltage detection only.
Q7: What is the maximum delay time of XC6121C442MR-G? A7: The maximum delay time of XC6121C442MR-G is 200ms.
Q8: Is XC6121C442MR-G suitable for automotive applications? A8: Yes, XC6121C442MR-G is AEC-Q100 qualified and can be used in automotive applications.
Q9: Does XC6121C442MR-G have a built-in hysteresis function? A9: Yes, XC6121C442MR-G has a built-in hysteresis function to prevent chattering.
Q10: What is the package type of XC6121C442MR-G? A10: XC6121C442MR-G is available in a SOT-25 package.
Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult with the manufacturer for specific details and application requirements.