Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6122C545MR-G
Переглянути деталі Таблиці даних

XC6122C545MR-G

Product Overview

Category

XC6122C545MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122C545MR-G comes in a small surface-mount package.

Essence

The essence of XC6122C545MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

This product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.45V ± 2%
  • Output Current: 200mA (max)
  • Dropout Voltage: 150mV (typ)
  • Quiescent Current: 30µA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C545MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6122C545MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Narrow input voltage range restricts its compatibility with certain systems.

Working Principles

XC6122C545MR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6122C545MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C545MR-G are: - XC6206P545MR-G - XC6220B545MR-G - XC6219B545MR-G - XC6204B545MR-G

These models offer similar voltage regulation capabilities and package options, providing flexibility in design choices.

In conclusion, XC6122C545MR-G is a compact voltage regulator with excellent voltage regulation characteristics. Its small size, low power consumption, and high efficiency make it suitable for various electronic applications. However, its limited output current capacity and narrow input voltage range should be taken into consideration when selecting this product for specific projects.

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6122C545MR-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6122C545MR-G in technical solutions:

  1. Question: What is XC6122C545MR-G?
    Answer: XC6122C545MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6122C545MR-G?
    Answer: The operating voltage range of XC6122C545MR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6122C545MR-G help in technical solutions?
    Answer: XC6122C545MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: Can XC6122C545MR-G be used in battery-powered applications?
    Answer: Yes, XC6122C545MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Question: What is the output type of XC6122C545MR-G?
    Answer: XC6122C545MR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

  6. Question: What is the typical reset threshold voltage of XC6122C545MR-G?
    Answer: The typical reset threshold voltage of XC6122C545MR-G is 4.55V.

  7. Question: Does XC6122C545MR-G have a built-in delay time?
    Answer: Yes, XC6122C545MR-G has a built-in delay time of approximately 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: Can XC6122C545MR-G be used in automotive applications?
    Answer: Yes, XC6122C545MR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and reset functionality are required.

  9. Question: What is the package type of XC6122C545MR-G?
    Answer: XC6122C545MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

  10. Question: Is XC6122C545MR-G RoHS compliant?
    Answer: Yes, XC6122C545MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for XC6122C545MR-G.