Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6122D717MR-G
Переглянути деталі Таблиці даних

XC6122D717MR-G

Product Overview

Category

XC6122D717MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

XC6122D717MR-G is available in a small surface-mount package.

Essence

The essence of XC6122D717MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

XC6122D717MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.7V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D717MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6122D717MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Wide input voltage range makes it compatible with various power sources.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122D717MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any input voltage variations.

Detailed Application Field Plans

XC6122D717MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D717MR-G are: - XC6122D717MR-G-1 - XC6122D717MR-G-2 - XC6122D717MR-G-3 - XC6122D717MR-G-4

These models offer similar voltage regulation capabilities and characteristics, providing flexibility in design choices.

Word count: 345 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6122D717MR-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6122D717MR-G in technical solutions:

  1. Q: What is XC6122D717MR-G? A: XC6122D717MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6122D717MR-G? A: The operating voltage range of XC6122D717MR-G is typically between 0.7V and 6.0V.

  3. Q: How does XC6122D717MR-G work? A: XC6122D717MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal, indicating a low voltage condition.

  4. Q: What is the output type of XC6122D717MR-G? A: XC6122D717MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Q: What is the quiescent current consumption of XC6122D717MR-G? A: The quiescent current consumption of XC6122D717MR-G is typically around 1.0µA, making it suitable for low-power applications.

  6. Q: Can XC6122D717MR-G be used for overvoltage detection? A: No, XC6122D717MR-G is specifically designed for undervoltage detection. It triggers an output signal when the voltage falls below the specified threshold.

  7. Q: What is the typical accuracy of XC6122D717MR-G? A: The typical accuracy of XC6122D717MR-G is ±1.5% of the detection voltage.

  8. Q: Can XC6122D717MR-G be used in automotive applications? A: Yes, XC6122D717MR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  9. Q: What is the temperature range of XC6122D717MR-G? A: The operating temperature range of XC6122D717MR-G is typically between -40°C and +85°C.

  10. Q: How is XC6122D717MR-G packaged? A: XC6122D717MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.