Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6123A427MR-G
Переглянути деталі Таблиці даних

XC6123A427MR-G

Product Overview

Category

XC6123A427MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123A427MR-G is available in a small surface-mount package.

Essence

The essence of XC6123A427MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The product is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.27V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123A427MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6123A427MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature rise, the regulator enters a thermal shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-saving designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may affect the efficiency in low input voltage scenarios.

Working Principles

XC6123A427MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6123A427MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123A427MR-G are: - XC6206P427MR-G - XC6220B427MR-G - XC6219B427MR-G - XC6221B427MR-G - XC6222B427MR-G

These models offer similar functionality and specifications, providing flexibility in design choices.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6123A427MR-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6123A427MR-G in technical solutions:

  1. Question: What is the XC6123A427MR-G?
    Answer: The XC6123A427MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123A427MR-G?
    Answer: The XC6123A427MR-G operates within a voltage range of 0.9V to 6.0V.

  3. Question: How does XC6123A427MR-G help in technical solutions?
    Answer: XC6123A427MR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctioning or data corruption during power fluctuations.

  4. Question: Can XC6123A427MR-G be used in battery-powered applications?
    Answer: Yes, XC6123A427MR-G can be used in battery-powered applications as it has a low quiescent current consumption of only 0.5µA.

  5. Question: What is the typical reset voltage threshold of XC6123A427MR-G?
    Answer: The typical reset voltage threshold of XC6123A427MR-G is 4.27V.

  6. Question: Does XC6123A427MR-G have an adjustable reset voltage threshold?
    Answer: No, XC6123A427MR-G has a fixed reset voltage threshold and cannot be adjusted.

  7. Question: Is XC6123A427MR-G suitable for automotive applications?
    Answer: Yes, XC6123A427MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  8. Question: What is the output type of XC6123A427MR-G?
    Answer: XC6123A427MR-G has an active low open-drain output.

  9. Question: Can XC6123A427MR-G be used in high-temperature environments?
    Answer: Yes, XC6123A427MR-G has a wide operating temperature range of -40°C to +105°C, making it suitable for high-temperature environments.

  10. Question: Is XC6123A427MR-G available in different package options?
    Answer: Yes, XC6123A427MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained applications.

Please note that these answers are based on general information and may vary depending on the specific datasheet and application requirements.