Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6124C236ER-G
Переглянути деталі Таблиці даних

XC6124C236ER-G

Product Overview

Category

XC6124C236ER-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6124C236ER-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6124C236ER-G lies in its ability to regulate voltage and efficiently manage power in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124C236ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (active high)

Functional Features

  • Voltage regulation: The XC6124C236ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Enable pin: The enable pin allows for easy control of the device's operation.

Advantages and Disadvantages

Advantages

  • Compact size enables use in space-constrained applications.
  • High efficiency results in reduced power consumption.
  • Wide input and output voltage ranges provide flexibility in various applications.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low-input voltage scenarios.

Working Principles

The XC6124C236ER-G utilizes a combination of internal circuitry, feedback mechanisms, and control logic to regulate the output voltage. It continuously monitors the input voltage and adjusts its internal components to maintain a stable output voltage within the specified range.

Detailed Application Field Plans

XC6124C236ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. XC6124C236ER-G is part of the XC6124 series, which includes other models with different output voltage options.
  2. Alternative models from different manufacturers include:
    • Model A: Similar specifications, different package size
    • Model B: Higher maximum output current, wider temperature range
    • Model C: Lower dropout voltage, higher efficiency

Please note that the above alternative models are provided as examples and there may be additional alternatives available in the market.

Word count: 413 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6124C236ER-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6124C236ER-G in technical solutions:

  1. Question: What is XC6124C236ER-G?
    Answer: XC6124C236ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124C236ER-G?
    Answer: The operating voltage range of XC6124C236ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124C236ER-G work?
    Answer: XC6124C236ER-G works by continuously monitoring the input voltage and comparing it to a preset threshold. When the input voltage falls below or exceeds this threshold, the output of the IC changes state, indicating a power supply fault.

  4. Question: What is the output configuration of XC6124C236ER-G?
    Answer: XC6124C236ER-G has an open-drain output configuration, which means that it can only pull the output low but not drive it high. An external pull-up resistor is required to provide the high level signal.

  5. Question: What is the typical quiescent current consumption of XC6124C236ER-G?
    Answer: The typical quiescent current consumption of XC6124C236ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6124C236ER-G be used for undervoltage and overvoltage detection?
    Answer: Yes, XC6124C236ER-G can be used for both undervoltage and overvoltage detection. The threshold voltage can be set using external resistors to suit the specific application requirements.

  7. Question: What is the response time of XC6124C236ER-G?
    Answer: The response time of XC6124C236ER-G is typically very fast, usually within a few microseconds.

  8. Question: Can XC6124C236ER-G be used in battery-powered applications?
    Answer: Yes, XC6124C236ER-G can be used in battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  9. Question: Is XC6124C236ER-G suitable for automotive applications?
    Answer: Yes, XC6124C236ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards and has a wide operating temperature range.

  10. Question: Can XC6124C236ER-G be used in industrial control systems?
    Answer: Yes, XC6124C236ER-G can be used in industrial control systems as it is designed to withstand harsh environments and has built-in protection features against voltage spikes and transients.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.