Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6124C721MR-G
Переглянути деталі Таблиці даних

XC6124C721MR-G

Product Overview

Category

XC6124C721MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High efficiency
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124C721MR-G comes in a small surface-mount package.

Essence

The essence of XC6124C721MR-G is to provide a stable and regulated voltage supply to electronic devices.

Packaging/Quantity

It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 200mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C721MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124C721MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current to a safe level.
  • Thermal shutdown protection: In case of excessive temperature, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small size allows for space-saving designs.
  • Low power consumption helps prolong battery life.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Fixed output voltage may not be adjustable for specific requirements.

Working Principles

XC6124C721MR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. This ensures that the output voltage remains stable even when the input voltage or load conditions change.

Detailed Application Field Plans

XC6124C721MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124C721MR-G are: - XC6206P182MR - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT

These alternatives can be considered based on specific requirements and availability.

Word count: 343 words

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6124C721MR-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6124C721MR-G in technical solutions:

  1. Question: What is XC6124C721MR-G?
    - Answer: XC6124C721MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the power supply voltage and provide a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124C721MR-G?
    - Answer: The operating voltage range of XC6124C721MR-G is typically from 0.8V to 6.0V.

  3. Question: What is the output type of XC6124C721MR-G?
    - Answer: XC6124C721MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different functionalities.

  4. Question: What is the typical quiescent current consumption of XC6124C721MR-G?
    - Answer: The typical quiescent current consumption of XC6124C721MR-G is very low, usually around 1.0µA.

  5. Question: Can XC6124C721MR-G be used for battery-powered applications?
    - Answer: Yes, XC6124C721MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  6. Question: How does XC6124C721MR-G detect undervoltage conditions?
    - Answer: XC6124C721MR-G compares the input voltage with a reference voltage internally. When the input voltage drops below the threshold voltage, it triggers the reset signal.

  7. Question: What is the typical reset delay time of XC6124C721MR-G?
    - Answer: The typical reset delay time of XC6124C721MR-G is around 200ms, but it can be adjusted using an external capacitor.

  8. Question: Can XC6124C721MR-G be used in automotive applications?
    - Answer: Yes, XC6124C721MR-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Question: What is the temperature range for XC6124C721MR-G?
    - Answer: XC6124C721MR-G has an operating temperature range of -40°C to +85°C.

  10. Question: How is XC6124C721MR-G typically packaged?
    - Answer: XC6124C721MR-G is typically available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.