Torex Semiconductor Ltd
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
XC6124E725ER-G
Переглянути деталі Таблиці даних

XC6124E725ER-G

Product Overview

Category

XC6124E725ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC6124E725ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124E725ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6124E725ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 25μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E725ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. EN (Enable)
  5. VOUT (Output Voltage)

Functional Features

  • High Precision Voltage Regulation: XC6124E725ER-G ensures accurate and stable output voltage.
  • Low Dropout Voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low Quiescent Current: The regulator consumes minimal current when no load is connected.
  • Thermal Shutdown Protection: It automatically shuts down to prevent damage from excessive heat.
  • Short Circuit Protection: XC6124E725ER-G safeguards against short circuits, preventing potential damage to the circuit.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage allows for efficient operation in various conditions.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents overheating.
  • Short circuit protection safeguards the circuit.

Disadvantages

  • Limited input voltage range (2.5V - 6.0V).
  • Output voltage fixed at 2.5V, limiting flexibility in certain applications.

Working Principles

XC6124E725ER-G operates based on a feedback mechanism that compares the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a stable output voltage despite changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6124E725ER-G finds application in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E725ER-G are: - XC6124C725ER-G: Similar specifications but with a different package type (SOT-89-5). - XC6124D725ER-G: Higher output voltage variant (3.3V) with similar characteristics. - XC6124F725ER-G: Lower output voltage variant (1.8V) with similar characteristics.

Note: The above alternatives are just examples and there may be other suitable alternatives available in the market.

This entry provides an overview of XC6124E725ER-G, including its category, use, characteristics, package, essence, packaging/quantity information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням XC6124E725ER-G у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of XC6124E725ER-G in technical solutions:

  1. Q: What is XC6124E725ER-G? A: XC6124E725ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124E725ER-G? A: The operating voltage range of XC6124E725ER-G is from 0.8V to 6.0V.

  3. Q: What is the output type of XC6124E725ER-G? A: XC6124E725ER-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.

  4. Q: What is the typical quiescent current consumption of XC6124E725ER-G? A: The typical quiescent current consumption of XC6124E725ER-G is very low, typically around 1.0µA.

  5. Q: Can XC6124E725ER-G be used for undervoltage detection? A: Yes, XC6124E725ER-G can be used for undervoltage detection. It has a built-in voltage reference and comparator that can detect when the input voltage drops below a certain threshold.

  6. Q: What is the accuracy of the voltage detection in XC6124E725ER-G? A: The accuracy of voltage detection in XC6124E725ER-G is typically ±1.0%.

  7. Q: Can XC6124E725ER-G be used for overvoltage detection? A: No, XC6124E725ER-G is designed for undervoltage detection only. It does not have built-in circuitry to detect overvoltage conditions.

  8. Q: What is the output voltage level of XC6124E725ER-G when the input voltage is below the threshold? A: When the input voltage is below the threshold, the output of XC6124E725ER-G is pulled low (logic low).

  9. Q: Can XC6124E725ER-G be used in battery-powered applications? A: Yes, XC6124E725ER-G can be used in battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  10. Q: Is XC6124E725ER-G available in different package options? A: Yes, XC6124E725ER-G is available in different package options, such as SOT-25 and USP-6B, providing flexibility for various PCB layouts and space constraints.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.