Toshiba Semiconductor and Storage
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
74VHC574FT
Переглянути деталі Таблиці даних

Encyclopedia Entry: 74VHC574FT

Product Overview

Category

The 74VHC574FT belongs to the category of integrated circuits (ICs) and specifically falls under the family of flip-flops.

Use

This IC is commonly used in digital electronic systems for storing and transferring data. It serves as an essential component in various applications, including microprocessors, memory units, and communication devices.

Characteristics

  • High-speed operation: The 74VHC574FT offers fast data transfer rates, making it suitable for time-critical applications.
  • Low power consumption: This IC is designed to minimize power consumption, ensuring energy efficiency in electronic systems.
  • Wide operating voltage range: It can operate within a broad voltage range, typically between 2V and 5.5V.
  • Compatibility: The 74VHC574FT is compatible with both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) logic levels.

Package and Quantity

The 74VHC574FT is available in a small-outline integrated circuit (SOIC) package. Each package contains one IC.

Essence

The essence of the 74VHC574FT lies in its ability to store and transfer digital data reliably and efficiently within electronic systems.

Packaging/Quantity

The 74VHC574FT is typically sold in reels or tubes, with each reel containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Supply Voltage Range: 2V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: X MHz (specific value depends on the variant)

Detailed Pin Configuration

The 74VHC574FT features a total of 20 pins, each serving a specific function. The pin configuration is as follows:

  1. Pin 1: Output Q0
  2. Pin 2: Output Q1
  3. Pin 3: Output Q2
  4. Pin 4: Output Q3
  5. Pin 5: Output Q4
  6. Pin 6: Output Q5
  7. Pin 7: Output Q6
  8. Pin 8: Output Q7
  9. Pin 9: GND (Ground)
  10. Pin 10: Clock Input (CLK)
  11. Pin 11: Data Input D0
  12. Pin 12: Data Input D1
  13. Pin 13: Data Input D2
  14. Pin 14: Data Input D3
  15. Pin 15: Data Input D4
  16. Pin 16: Data Input D5
  17. Pin 17: Data Input D6
  18. Pin 18: Data Input D7
  19. Pin 19: Output Enable (OE)
  20. Pin 20: VCC (Supply Voltage)

Functional Features

The 74VHC574FT offers the following functional features:

  • Data storage: It can store data on its eight output pins (Q0-Q7) until new data is received.
  • Data transfer: The IC allows for the transfer of stored data to other components or devices when triggered by the clock input.
  • Output enable control: The output enable pin (OE) enables or disables the outputs, providing flexibility in controlling data flow.

Advantages and Disadvantages

Advantages

  • High-speed operation facilitates efficient data transfer.
  • Low power consumption ensures energy efficiency.
  • Wide operating voltage range enhances compatibility with various systems.
  • Compatibility with TTL and CMOS logic levels simplifies integration into existing designs.

Disadvantages

  • Limited storage capacity: The 74VHC574FT can store data on eight output pins, which may be insufficient for certain applications requiring larger memory capacities.
  • Sensitivity to voltage fluctuations: Extreme voltage variations beyond the specified range may affect the IC's performance and reliability.

Working Principles

The 74VHC574FT operates based on the principles of flip-flops. It utilizes positive-edge-triggered D-type flip-flops to store and transfer data. When a clock signal is received, the input data is latched and stored in the flip-flops. Subsequently, the stored data can be transferred to other components or devices as required.

Detailed Application Field Plans

The 74VHC574FT finds extensive application in various digital electronic systems, including but not limited to:

  1. Microprocessors: It serves as a vital component in microprocessor architectures, enabling efficient data storage and transfer within the system.
  2. Memory Units: The IC facilitates data storage and retrieval in memory units, such as RAM (Random Access Memory) and ROM (Read-Only Memory).
  3. Communication Devices:

Перелічіть 10 типових запитань і відповідей, пов’язаних із застосуванням 74VHC574FT у технічних рішеннях

Sure! Here are 10 common questions and answers related to the application of 74VHC574FT in technical solutions:

  1. Q: What is the 74VHC574FT? A: The 74VHC574FT is a type of octal D-type flip-flop with 3-state outputs, commonly used in digital logic circuits.

  2. Q: What is the purpose of the 74VHC574FT? A: The 74VHC574FT is used for storing and transferring data in digital systems. It can be used for various applications such as data buffering, address decoding, and synchronization.

  3. Q: What is the voltage range supported by the 74VHC574FT? A: The 74VHC574FT operates within a voltage range of 2.0V to 5.5V, making it compatible with both TTL and CMOS logic levels.

  4. Q: How many flip-flops are there in the 74VHC574FT? A: The 74VHC574FT consists of 8 individual D-type flip-flops, making it an octal flip-flop.

  5. Q: Can the outputs of the 74VHC574FT be disabled? A: Yes, the 74VHC574FT has 3-state outputs, which means they can be disabled or put into a high-impedance state when not in use.

  6. Q: What is the maximum operating frequency of the 74VHC574FT? A: The maximum operating frequency of the 74VHC574FT depends on various factors, but it can typically operate at frequencies up to several hundred megahertz (MHz).

  7. Q: Is the 74VHC574FT suitable for high-speed applications? A: Yes, the 74VHC574FT is designed to be fast and can be used in high-speed applications such as data communication systems and microprocessors.

  8. Q: Can the 74VHC574FT handle both rising and falling edge-triggered inputs? A: Yes, the 74VHC574FT supports both rising and falling edge-triggered inputs, allowing for flexible data capture.

  9. Q: What is the power supply voltage required for the 74VHC574FT? A: The 74VHC574FT typically requires a power supply voltage of 3.3V or 5V, depending on the specific version.

  10. Q: Are there any special considerations when using the 74VHC574FT? A: It is important to ensure proper decoupling and bypass capacitors are used near the power supply pins to minimize noise and ensure stable operation. Additionally, care should be taken to avoid exceeding the maximum ratings specified in the datasheet, such as voltage and current limits.

Please note that these answers are general and may vary depending on the specific application and requirements. Always refer to the datasheet and consult with an expert for accurate information.