XC1765ELVO8I

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Memory device
• Characteristics: Non-volatile, electrically erasable programmable read-only memory (EEPROM)
• Package: ELVO8I package
• Essence: Stores and retrieves digital information even when power is turned off
• Packaging/Quantity: Typically sold in reels or trays containing multiple units

Specifications

• Memory Capacity: 1765 kilobits (Kb)
• Organization: 220 x 8 bits
• Supply Voltage: 2.7V to 3.6V
• Operating Temperature Range: -40°C to +85°C
• Write/Erase Endurance: 1 million cycles
• Data Retention: 100 years

Detailed Pin Configuration

The XC1765ELVO8I has a total of 8 pins, which are labeled as follows:

1. VCC: Power supply voltage input
2. GND: Ground reference
3. A0: Address input bit 0
4. A1: Address input bit 1
5. A2: Address input bit 2
6. CE: Chip enable input
7. WE: Write enable input
8. O/P: Output data pin

Functional Features

• Non-volatile memory: Retains stored data even without power
• Electrically erasable: Allows for easy modification of stored information
• High endurance: Can withstand frequent write and erase cycles
• Low power consumption: Operates efficiently with low power requirements
• Fast access time: Provides quick retrieval of stored data

Advantages and Disadvantages

Advantages: - Non-volatile nature ensures data integrity - Easy to program and erase - High endurance allows for extensive usage - Low power consumption prolongs battery life

Disadvantages: - Limited storage capacity compared to other memory devices - Relatively slower access time compared to volatile memory

Working Principles

The XC1765ELVO8I is based on EEPROM technology, which utilizes floating-gate transistors to store and retrieve digital information. When data needs to be written, a high voltage is applied to the gate of the transistor, allowing electrons to tunnel through the insulating layer and become trapped in the floating gate. This trapped charge alters the transistor's threshold voltage, representing a binary value (0 or 1). To erase the stored data, a higher voltage is applied to remove the trapped charge from the floating gate.

Detailed Application Field Plans

The XC1765ELVO8I is commonly used in various applications, including: - Consumer electronics: Used for storing firmware, configuration settings, and user data in devices such as smartphones, tablets, and digital cameras. - Automotive industry: Employed in electronic control units (ECUs) for storing calibration data, fault codes, and vehicle-specific settings. - Industrial automation: Utilized in programmable logic controllers (PLCs) for storing program code, configuration parameters, and historical data. - Medical devices: Integrated into medical equipment for storing patient data, device settings, and firmware updates.

Detailed and Complete Alternative Models

• XC1765ELVO8C: Similar to XC1765ELVO8I but with different package type (C package)
• XC1765ELVO16I: Double the memory capacity of XC1765ELVO8I (3520 Kb)
• XC1765ELVO4I: Half the memory capacity of XC1765ELVO8I (882 Kb)

(Note: The above alternative models are provided for illustrative purposes and may not represent actual existing products.)

This entry provides an overview of the XC1765ELVO8I integrated circuit, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.