onsemi (Ansemi)
Зображення може бути репрезентативним.
Деталі продукту див. у специфікаціях.
CAT1021WI-30-GT3 EEPROM Serial 2-Kb I2C CPU Supervisor

CAT1021WI-30-GT3

EEPROM Serial 2-Kb I2C CPU Supervisor
Номер деталі
CAT1021WI-30-GT3
Категорія
Memory > EEPROM
Виробник/бренд
onsemi (Ansemi)
Інкапсуляція
SOIC-8
Упаковка
taping
Кількість упаковок
3000
опис
The CAT1021 is a comprehensive memory and supervisory management solution for microcontroller-based systems. An EEPROM serial 2-Kb I2C CPU supervisor is integrated with a system power supervisor with brown-out protection using low-power CMOS technology. The memory interface is via a 400 kHz I²C bus. The CAT1021 provides a precision VCC sensing circuit and two open-drain outputs: one (reset) output drives high and the other (reset) output drives low when VCC is below the reset threshold voltage. The CAT1021 also has a write protect input (WP). If WP is tied to logic high, write operations are disabled. The supervisor has a 1.6-second watchdog timer circuit that resets the system to a known state if a software or hardware failure causes the system to shut down or halt. A supervisory timer monitors the SDA signal. A power monitor and reset circuit protects the memory and system controller during power-on/off and under-voltage conditions. Five reset threshold voltages support 5.0 V, 3.3 V, and 3.0 V systems. If the supply voltage is out of tolerance, a reset signal is activated, preventing operation of the system microcontroller, ASIC or peripherals. The reset signal is typically deasserted 200 ms after the supply voltage exceeds the reset threshold level. When both high and low reset signals are active, interfacing with microcontrollers and other integrated circuits is simplified. Additionally, a reset pin or a separate input MR can be used as an input with push-button manual reset. The on-chip 2 Kb EEPROM memory has a 16-byte page. In addition, VCC sensing circuitry provides hardware data protection to prevent memory writes when VCC falls below the reset threshold or when VCC reaches the reset threshold during power-up. Available packages include 8-pin DIP, 8-pin SOIC, 8-pin TSSOP, 8-pin TDFN, and 8-pin MSOP. TDFN package
Запит пропозиції
Заповніть усі обов’язкові поля та натисніть «НАДІСЛАТИ», ми зв’яжемося з вами електронною поштою протягом 12 годин. Якщо у вас виникнуть проблеми, залиште повідомлення або електронну пошту [email protected], ми відповімо якомога швидше.
В наявності 82670 PCS
Контактна інформація
Ключові слова CAT1021WI-30-GT3
CAT1021WI-30-GT3 Електронні компоненти
CAT1021WI-30-GT3 Продажі
CAT1021WI-30-GT3 Постачальник
CAT1021WI-30-GT3 Дистриб'ютор
CAT1021WI-30-GT3 Таблиця даних
CAT1021WI-30-GT3 Фотографії
CAT1021WI-30-GT3 Ціна
CAT1021WI-30-GT3 Пропозиція
CAT1021WI-30-GT3 Найнижча ціна
CAT1021WI-30-GT3 Пошук
CAT1021WI-30-GT3 Закупівля
CAT1021WI-30-GT3 Чіп